When I have a station equation on an alignment, my Civil Accudraw window is not able to show me the entire station address where the stationing gets to 100+00 or higher.
You see that I can't see the region, and therefore I don't have the full address. Yes, there is a workaround. I can select the field, select all text, and paste in Notepad or whatever. I don't know anyone who would want to do that very often.
On this project I have another alignment that gets into 1000+00 and higher.
As an unacceptable solution, I figured I might benefit from reducing the resolution on the station. I went to the coordinates settings for civil accudraw.
When I attempt to modify the entry for Station, it rejects my input by just returning it to what it had been. I've tried clicking the checkbox to the right,
Ok, so I was going about this the wrong way at first. I assumed that the 0+00.0000 was a representation of what digits needed to be filled (like Excel), so I was trying at first to just delete that last zero. That didn't work.
I figured out that I needed to enter a 1 in whatever place I wanted to round to. To test, I placed a 1 in the 100 place, but that doesn't work either. Accudraw continues to report to 4 decimal places. It just reports something like 234+52.5075 or 234+55.5075 or 215+24.5075. That sort of thing. It looks as if the value of the tail is related to the station at the beginning of the region.
Is this working as intended?
Also, could the station window be larger so that we can see the full address of an arbitrarily addressed chain? (Or at least one that will support up to a 2-digit region number along with a 10 significant figures?)
I'm running Power Geopak SS4 .845.