OpenRoads Designer CONNECT Edition - 2018 Release 3 (V10.05.00.30) has been posted to the Software Fulfillment Center.
For more information, please view the Readme file located here.
What is New Bentley OpenRoads Designer CONNECT Edition
The following summarizes the new features and enhancements in this 2018 Release 3.
General Enhancements
- Update of Power Platform to Update 10 CONNECT Edition(V10.10.00.28). The corresponding MicroStation version is (V10.010.00.23).
- Includes Bentley LumenRT Designer CONNECT Edition Update 10.
- Includes Bentley Descartes CONNECT Edition Update 2 (V10.08.00.27).
- Update of gINT Civil Tools CONNECT Edition Update 1 (V10.01.01.21).
- Support for following ProjectWise Connect Edition (V10.00.03.49) & (V10.00.03.140).
- Optimized the loading of Properties dialog of mesh entities.
- Least square method is added to the Transform tool.
Survey Enhancements
- Resolved issue on custom attribute on survey overrides.
- Fixed issue in Explorer when toggling on and off Feature definition for survey.
Geometry Enhancements
- Locate Geometry Points via Points on Curve, Angle Resection, and Points of Intersection methods.
- Added description to geometry points with LandXML Import.
- XML Reports display geometry points' descriptions.
- Table Editor displays K values, back slope, back tangent length, and allows either parabolic and/or arc defined geometry for vertical geometry.
- Horizontal geometry in the Table Editor now displays columns for station, back bearing, back tangent length.
- Added Report button and Design Standards Warning in the Table Editor.
- Speed table displays maximum grade of vertical alignment.
- Ability to Import, Copy and Project Speed Table information.
- Allow the Project Profile to Element & Project Profile Range to Element tools now allow selection of elements from a reference file.
Modeling Enhancements
- Create Cut Fill Volumes tool has been enhanced to use featurized meshes in the analysis. It is no longer required to create a terrain model for the proposed rough grade.
- Performance improvements for Create Cut Fill tool.
- The cut and fill <volume options> now have setting to define for cut and fill factors for the appropriate one.
- Added ability to split Unsuitable material during creation of Cut and Fill meshes. This allows distinct values for "Removed Only" and "Removed and Replaced" unsuitable materials.
- Resolved an issue where component display rules that would yield incorrect results.
- Corrected corridor performance with specific data sets.
Drawing Production and Annotation Enhancements
- Added ability to place cells (North Arrows) on Plan Drawing Models.
- Vertical alignment elevations are displayed on plan alignment annotations.
Subsurface Utilities Enhancements
- This version uses Haestad version 10.01.01.04 and includes the cumulative patch set as of 09/19/18.
- Tabular annotation functionality is now available for Subsurface Utilities profile drawings. This uses Text Favourites, which can already be used for plan annotation, to provide both the value and the formatting for the annotation.
- The 2D cell that is used to draw a node in plan is now drawn using all of the elements in the cell, including text, hatching, etc. Previously, only a subset of the elements that the cell contained were drawn.
- If a storm or sanitary element is selected in the graphics, or anywhere else (such as the properties of a scenario) that displays information in the Hydraulic Analysis tab of Utility Properties, then this tab is now automatically displayed above the Subsurface Utilities tab.
Technology Preview Enhancements
- Added a Geometry Builder and Editor to create parcels and plats.
- Creation of a Mass Haul diagram based on the 3D prismoidal Cut and Fill meshes.
- Create HEC-RAS format to export data for further stream and river analysis.
- Export 3D models to IFC format. (Based on IFC4 schema 2 and the viewer needs to support that version.)
- Add internal and single Station Equations.
- Asset Manager.
- Text Favorite Manager.
- Export to MaXML.