Trying to produce Proposed Cross sections
I am having some issues generating proposed cross section using criteria files. I am using Bentley Geopak Civil Engineering Suite and I keep getting the error that this typical Section cell can’t be...
View ArticleIssues upgrading project from XM to SS2
Our team will be opening and updating a project that was designed using XM version (MS 8.9.451 and IR 8.9.051 or .261). Does anyone know if there will be any issues with upgrading to our current...
View ArticleWhat are the current versions to load geopak ss2 and geopak ss4 at the same...
dual installation of ss2 and open roads
View ArticleTerrain Models in Power Inroads SS4
Is there a way to join features in an existing terrain so as to reduce the number of corridor point controls that target them?
View ArticleMasking
Can any one help, what is the difference between Apply current Masking and No Masking in Cross section.
View ArticleHow can I use Print Organiser to replace Batch Print in MX SS4? Can anyone...
New to MX SS4 and I am trying to print multi sheet dpf's directly from MX. I used to use the batch plot utility to process my cross sections into pdf's in MX SS2 no problem.Specifically I wish to plot...
View ArticleTerrain Not Staying Active Power GEOPAK 08.11.09.722
I have an alignment file in which the terrain does not stay active. Every time I display a profile I need to make the terrain active. Also, every time I now enter back into the file I get a dialog box...
View ArticleInroads Planimetric items showing up in drawing after closing drawing and...
Can any one tell me why this is happening?
View ArticlegINT Civil Tools Question
I have downloaded and installed the gINT Civil Tools add-on. In PowerGEOPAK SS3, if I open my key-in browser to key-in "gintciviltools start", the command is not included in my list of available...
View ArticlePrint Organizer in MX SS4 crashing on opening.
Hi, Need some help, when I try to load the Print Organizer through the MX menu, File -> Print Organizer. The app loads but is unresponsive. After a couple of minutes I get the following error...
View ArticleV8i SS2 End condition exceptions issue
The template I am using in InRoads has four end conditions. A variety of fill slopes, and a cut that inserts a channel. I have created another end condition for a modified embankment that creates a...
View ArticleDoes InRoads have a similar feature to Geopak Active Chain Control where you...
I used this feature extensively in Geopak to locate plan view items on my profile accurately with little effort. I have not found a similar feature in InRoads yet. Does it exist?
View ArticleLink a XIN file to MX SS4
Hi -Is it possible to link a preference file (XIN) from InRoads to our software, MX Road, for us to use the feature definitions/element templates in it?In the Project Explorer, right clicking on the...
View ArticleClik here to view.
Importing Geometry from MX for open roads
I am new to open roads. I was trying to import a master string into open roads. I imported Triangulation too and set it as active terrain. When i opened the profile model of the imported string, i see...
View ArticleIn Open Roads Geopak version how do a change a 40km vertical profile that was...
In Open Roads Geopak version how do a change a 40km vertical profile that was accidentally designed using circular curves to parabolic curves? Change all at once?
View ArticleUse of OpenRoads Workspaces in ProjectWise
Hi,I am trying to understand how Workspaces for MX SS4 work in the ProjectWise environment. There is a lot of information in the web about the advantages of using Workspaces to have common civil...
View ArticleRed Start STA in End Condition Exception List
I have a diversion road that is mostly just fill foreslopes. I need to create a ditch for one stretch on the right side of the road. I am trying to create an End Condition Exception but when I do,...
View ArticleStopping Sight Distance in Open Roads - Is there a report available or a...
In Geopak SS2 when you describe a profile the SSD is reported with the sag curve and you can use the visibility tool to show a graphical representation based upon a TIN file. Just wondering if there...
View Article[OR CR] Component Symbology Suggestion
When InRoads XM (08.07) was released, I was tasked with learning the now Template Editor and Roadway Designer to help our staff with migration strategies. As I worked with the product, I realized there...
View Article[OR SS3] Template drops enhancement
I've just recently done my first linear template drop and noticed that as you're placing the template drop and as you're editing the template drop after you've placed it, you can specify whether to...
View Article