Inroads not loading sample dll
I was able to successfully follow through the Inroads tutorial for creating a C++ dll for Inroads. I have MicroStation and Inroads loaded up, but when I go to Tools -> Run Macro... then I click my...
View Article[PowerCivil .789] Any tricks to show station level as kilometers?
Hi.All our projects are set up with meters as design unit, but I would like to show my profile station labels as kilometer with one decimal. Is there any solution out there for this?For now, I have to...
View ArticlePower Inroads SS3 - wont select horizontal alignment when creating cross...
The surface is channel bottom contours and the horizontal alignment is a simple line.The horizontal alignment was created from a graphic. When I click create cross sections under corridor modeling it...
View ArticleIs there a way to end an active surface at a point using InRoads templates?
I have a retaining wall that seeks the active surface and places it accordingly, but I want the active surface to stop and be "held back" by the retaining wall.Is this possible, or am I chasing...
View ArticleClik here to view.
InRoads v8i SS2 - Pipe flow status incorrectly saying "Full" (HGL issues)
I am in the process of sizing pipes and setting inverts for a roadway project. I am having issues with the HGL values because when I go to edit/review the pipe, it is listed as "Full" (for flow...
View ArticleHow to edit the drafting notes .dft file
I'm unable to find any information on how to edit the .dft file and what the variables within mean. Any help or direction would be greatly appreciated.Thank you,Brian
View ArticleClik here to view.
SS4 Openroads, profile handles and text not appearing.
Using V8i SS3 Version: V08.11.09.714 & InRoads SS4 Version: V08.11.09.845In my profile view for my mainline profile, suddenly I have no handles to manipulate the profile dynamically. See...
View ArticleCrossfall measurement
Can any one help to this issue,How to get crossfall measurerments at strings.
View ArticleOpenroads civil geometry question
I don't have OpenRoads so I'd appreciate some feedback on the technology. I have Power Civil SS1 which introduced the new Civil Geometry technology but it is limited to 2D relationships. Power Civil...
View Articlethrown to the wolves - need help with modifying dtm lines
good dayi just started after 3 years on the sideline. i need a little help modifying dtm breaklines in inroads survey. this is most likely a simple fix but i haven't used this version before.thanks in...
View ArticleGeopak Ancillary Feature - Extract Elevation
I am using the Draw Ancillary Feature tool in Geopak 08.11.09.722 to label the inverts of proposed pipes on cross sections. The pipes are drawn as 3d lines at the correct elevations.When I set Extract...
View ArticleGeopak Drainage - Inlet Station and offset
Our drainage design group is wondering if there's a way to lock both Station and Offset in the Inlet "Location" box. Roadway is planning on moving all of the chains several feet due to some datum issue...
View Article[Inroads] Unknown points in network
How to get past this error when doing network adjustments?
View ArticleCorridor Modeling/Key Stations
My corridor is calculating cross sections at points that are neither in my key station list nor on my template drop interval.Some instances of this appear to be where I HAD a key station drop that I...
View ArticleClik here to view.
Error Creating New .dgn File
Error Creating New .dgn File, Computer is running on Win 64bit and has started showing the error below. This has been resolved in the past by reinstalling the software however I am wanting to know if...
View ArticleGEOPAK-LANDXML SURFACE
Hello,I am using Power Geopak V8i SS2.I have a landxml surface from Autodesk Civil 3D and want to import the surface into Power Geopak. I thought I could do this using the DTM tools but at a closer...
View ArticleHow Calculate Quantity in Roadway Design
i want to Calculate Quantity in Roadway Design.
View ArticleRoundabout Design in GEOPAK
Hi all,I am learning GEOPAK, can anyone explain and share the procedure to design (3D) Roundabout in GEOPAK.I am using GEOPAK V8i (Select serires2).thanksBhaskar
View ArticleSS2: How to change the Style of 100 alignments in one click?
Hi guys,I have a problem with changing style for a big number of alignments.In my Geometry file I have around 100 of horizontals for troughing and 100 for cables lines. Everything with Default style :(...
View ArticleExtract Tin File
Hello, I have GEOPACK, however I don't know to use it. I have a TIN file that I need to extract in order to see the elevations of a project. What are the steps to extract a TIN file? Once extracted,...
View Article