Edge of pavement elevations
I’m attempting to use the Profile Intersection Point tool to locate the center line and edge of pavement for the intersecting road. The center line places the point as expected. The edge of pavement...
View ArticleDataset for SUDA training
Hi The dataset for placing inlets with precision and speed is missing in the Subsurface Utilities design and Analysis learning path. IS there a link were I can download it from?ThanksSteyn
View ArticleAnnotation of multiple vertical alignment profiles in a single profile
I've generated a profile based on a design road centreline. I managed to display the profiles of 2 additional vertical alignments (by means of the "alignments to profile" function). I now want to...
View ArticleSuperelevation - SS2 to SS4
Is there a workaround to get your Superelevation from SS2 to SS4?I know the developers are working to improve the Superelevation in SS4 but I sure could use a way to move the super from SS2 to SS4Thanks
View ArticleOpenRoads Design Stage
HiI have road corridor model and all the different standard design stages available to me. I want to use this model to create a 2d drawing of the layout.Is their a standard design stage that is used...
View ArticleClik here to view.
Link Code in Feature Definition
Hello,I am running into a issue with one of my feature definitions "POST" that contains the link code "ST". How do I keep InRoads from splitting my POST feature definition into a "PO" code with a link...
View ArticleClik here to view.
CLIPPING REFERENCE ON CORRIDOR OPENROADS
When I add a clipping reference to my corridor it turns all my finish grade yellow on my 3d model. I assume this is some sort of warning but im not sure what its warning me about. any ideas?...
View ArticleClik here to view.
Open Roads Corrupted Corridor
Hey all,I've created a corridor and after updating the template there are extra mesh elements created in the 3D model. If you hover over these elements, Microstation crashes. As well, the corridor...
View ArticlePowerGEOPAK SELECTseries 4
I have PowerGEOPAK SELECTseries 2 (08.11.07.443) and SELECTseries 3 (08.11.09.459 installed on my workstation and am trying to install SELECTseries 4 08.11.09..872 but I get an error saying that I...
View ArticleClik here to view.
Feature Definition Management
I am attempting to set up a project using Openroads (SS4) for a client that has limited civil geometry feature definitions set up. While determining all of the feature definitions that I need, there is...
View ArticleOpenRoads Cross Section Reference Border/Elevation Numbers Help
I am using Microstation V8i v8.11.9.655 and I have a quick question about referencing a border into the generation of cross sections. I am able to get the border in there (including major and minor...
View ArticlePower Inroads - Triangle display & selection in graphics
1. I have a terrain model with around 4million triangle to display. Running a 64Gb ram / dual processor workstation Power Inroads consistently crashes when tryingh to display them to graphics....
View ArticleGEOPAK-BOREHOLE NAME & OFFSET FORMAT
Hello,I am using Power Geopak v8i SS2.I am showing boreholes in profile and the local DOT is requesting to show the borehole name, and offset rounded to nearest foot with LT or RT suffix. Is there a...
View ArticleGEOPAK-BOREHOLE NAME WITH BOX
Hello,I am using Power Geopak v8i SS2.I am working with profiles and sampling boreholes in the profiles. I have a project with a local DOT and notice from an earlier example, that the DOT was showing...
View ArticleGEOAPK-CROSS SECTION SHEET
Hello,I am using Power Geopak v8i SS2.I am creating section sheets from my sections file, using the cross section sheet composition tool. I have successfully created my section sheets (90 sections...
View ArticleEdit Geometry
I am unable to edit geometry in various files. I assume something has changed in my configuration but am not sure where to lookPower Geopak SS4, v08.11.09.789
View ArticleClik here to view.
SECTION-SHEET DISPLAY
Hello,I am using Power Geopak v8i SS2.I have cut some sections and used the Section Sheet Composition tool to generate sheets. I have determined that the XS Search Criteria is what determines the...
View ArticleOpenRoads profile and cross section views shown in plan
It's important to be able to visualize what you're looking at in the profile and in the cross sections. Often the cross section view is shown as a pale blue line in the plan view. And often the...
View ArticleMicrostation GEOPAK "ddb feature not found"
I am getting a Microstation GEOPAK warning "ddb feature not found" every time that I hit the "add surface settings" in the draw profile dialog box, which prevents me from adding the surface to the...
View Article