Terrain Model Display in Cross Sections
My Original Ground Terrain Model has disappeared from cross sections when using the Create Cross Sections command. The active terrain model representing original ground is referenced to my corridor...
View ArticleReference file path broken
We have recently moved to PowerGeopak SS4 (08.11.09.845) and ever since the new deployment I have received numerous complaints of the reference paths becoming broken. This happens without any...
View ArticleImport GSF to Openroads
Will there be support for importing surfaces from a Geopak Site Modeler project file (.gsf) any time? We can't depend on having Site Modeler available to convert the models going forward into the future.
View Article[OR] Setting up Standards - Linked Native, Element Templates, Features, Etc....
We need a simplified, step by step explanation of how to setup some basic elements that make up the DGNLIB's needed to implement Open Roads.Please don't tell me to look at the sample workspaces. I...
View Article[OR] Attachment to 3D model offsets greyed out
Primary problem: My corridor element is out in la-la land, translated 2,147,483.647 feet in both northing and easting. I have no idea where this originally came from; it wasn't a number I ever entered...
View ArticleStation/Offset/Elevation Report for Template Point in OpenRoads
I'm trying to create a report that gives me the Offset/Elevation of a template point at a set interval based off the stationing of the Main alignment.Example:I have a DITCH_CEN_LT point that defines...
View ArticleClip mesh to terrain model
Is it possible to clip a mesh (representing excavation for a bridge pier) to the existing ground surface (terrain) or triangles(Please visit the site to view this file)?I want to turn the excavation...
View ArticleVolume from mesh
I'm trying to figure the volume between two meshes (excavation for bridge pier). I've created one mesh for the excavation limits which extends (upward) to the existing ground surface (meeting the...
View ArticleFeature definitions from .xin not carrying symbology through to dgn
Hi.I am working on PowerCivil SS4, with limited to fair previous SS2 InRoads experience. I am hitting a wall when it comes to symbologies and plan production. I have spent some time working through the...
View ArticleOpenRoads ConceptStation
Using the trial version of ConceptStation and I haven't been able to find any way of adding or subtracting lanes. You are able to switch templates along an alignment but you aren't able to modify the...
View ArticleSelect Text with rotation
Hello, I want to select a lot of text with text rotation. There are many text in my file. Their rotation is 0 degree, or 270 degree or 88 degree.I want to select only 270 degrees text. How can I do...
View ArticleMVBA error...........Microsoft Visual Basic run-time error '-2147024770...
Recently upgraded to PowerGEOPAK SS4. When attempting to load mvba's for drawing draining items in plans/profiles/x-sections getting a run-time error (mvba's worked fine prior to upgrading). Just...
View ArticleProblem Saving .GSF to ProjectWise
Since recently upgrading to ProjectWise CONNECT I have now been unable to save my Site Modeler .gsf file back into Projectwise OR my local C: drive. I am using the Inroads Site Modeler Add-in. All...
View Articleimport alignment with a shift
The latest issue I am having with OpenRoads stems from the way it is importing alignment information from a gpk. I am trying to import an alignment that has a "shift" which is a traditional geopak cogo...
View ArticlePowerCivil SS4 - Open cross section model - Crash
Hi!I am having a problem when I am opening my Cross section model in PowerCivil SS4. After I have applied a superelevation to my corridor I can no longer open the cross section model without having a...
View ArticleAnyone else being productive
I am absolutely at my wits end and need to blow off some steam. NEVER in my 21 years of drafting and design have I used such poorly programmed software. Openroads is a Civl3d wannabe, and is garbage. I...
View Article[Geopak] [OR] Showing ROW lines in dynamic cross sections
I represent ROW lines on cross sections using ancillary features, but this can be done only on permanent cross sections, and it has to be re-run every time I cut permanent cross sections. I'd not only...
View ArticleLatest InRoads download
I am trying to download the latest version of InRoads Suite and it is stopping mid download because it is requiring the latest version of Microstation. Prior to this download, I did download what I...
View ArticleClik here to view.
Inserting breakpoints in vertical profile
Hello,I'm trying to figure out how to insert breakpoints into the vertical profile of a line built by a civil cell.I'm laying out the edge of lane for a sideroad intersection that tapers from a...
View ArticleClik here to view.
Reference Dialog Box Quotes GEOPAK SS4 (08.11.09.851)
Can someone explain what the quotes mean in the reference file dialog box? These quotes only appear in the Default 3D model reference tree not the main reference file tree.Also, when I first set up the...
View Article