OpenRoads SS3 - How to remove a linear template?
Hi All,quick question. How to you remove a linear template from an element? I havent been able to find a remove/delete button. I don't want to have to delete the element.Has anyone found the linear...
View ArticleStation Equation Annotation - Inroads SS2
I have an equation in my horizontal alignment and can't get it to annotate the way I want it to. Under File>Project Options>Abbreviations, I have set up the EQN: to STA. EQN.When I go to...
View ArticlePowerCivil V8i Series 2 - scale topo survey drawn in wrong units
I have been sent a topo survey file with foot contours that are in fact drawn in inches. Is there a quick way of scaling it up or re-defining the contours as feet and not inches? If not, can someone...
View ArticleProjected Vertical Alignment - No Solution Found
I have 2 proposed alignments and one existing alignment along a 66 mile corridor. The existing alignment varies from left to right in its location from the proposed alignments. I have stored a VA from...
View ArticleOpenRoads - Add sections and End Area Volumes
I have created cross sections from an Openroads corridor with the sections cut at 25 foot intervals. In the End-Area Volumes tool I would like to specify a station range of volume exceptions using...
View Article[MX 2004] DXF problem
Hello,On my old desktop I got a very very old MX of 2004 edition. I got there also an old project and just want to export some drawings into 2D DXF but during open an exported drawing I encountered a...
View ArticleCivil Cells are slowing down
Hi,I'm working on a design with a lot of civil cells about 25 at this moment and the speed of my drawing is terrible slowing down. For example when I change one radius it took about 1.10 minutes to...
View ArticleTerrain model at roundabout approach
Dear All,I am trying to create a terrain model using the curb return elements and roundabout pavement outer edge as boundary strings for attaching a surface template. What is the best way to do this?...
View ArticleGEOPAK SS3 - Draw Profiles command equivalent
In GEOPAK SS2 there is a Draw Profiles command that I used quite often to project either surveyed edge of pavement profiles or simply a profile cut X' LT or RT of CL. I could then refer to these...
View ArticleGEOPAK SS3 - Extract profile from corridor surface
In GEOPAK SS2 I could easily create a surface from a corridor and a tin file would be automatically generated. I could then extract a profile from this tin and draw it on a profile cell using the Draw...
View Article[MXV8i SS3] OpenRoads Technology Q&A
Dear OpenRoads Expert,I do have few questions regarding OpenRoads Technology specially for MXRoad user,Anyone that know the answer, please reply and provide the steps if possible,This issue may...
View Articleopen roads corrupt corridor
Dear All,One of the corridors in the dgn file containing the corridors got corrupted and throws me out of the software if I try editing or deleting it. I am not sure what the problem is and what is the...
View ArticleMxROAD V8i-SS2 Fly Through
Back in November Simon Pegg showed how to produce a Flythrough. He mentioned the extra bits that you can insert into the flythrough such as lighting columns ,gullies etc. Can someone give me some...
View Articlegenio file convertion
I wnt to convert the autocad curve detail into mx road as horizontal alignment if i enter in xcel file it had to genrate genio format so if i paste in notepad and convert to genio file please any one...
View ArticleLimits of Construction in OpenRoads
Is there a process to draw plan view elements representing the limits of construction for a corridor model in OpenRoads? I see there are elements within the corridors on levels such as Grade_Cut and...
View ArticleCreating Cross-sections - No Terrain showing
I've cut sections through a corridor so I can produce end area volumes. The corridor interfaces with my "Active Terrain" although when I cut the sections the terrain doesn't show.Any ideas on why this...
View Article[MX V8i SS3] Vertical curves defined by length
Hello,I need to design a vertical curves in an alignment which are defined by its length. In result I should obtain a K-value as a result of slope differences and courve length. I found this...
View ArticleClik here to view.
v08.11.09.459 Terrain model create from elements not going to both...
v08.11.09.459 Terrain model create from elements not going to both Road_EdgeOfPavement, please take a look.
View ArticleMxROAD V8i SS2
I am currently running a flythrough of my scheme and I am needing some advice on adding the extra elements such as Lighting, white lining etc and am also wondering whether I can add in overhead...
View Article