Clik here to view.
Is this normal? OnModelMotion, OnModelMotionStopped, OnComplexDynamics,...
I'm sorry, I tried searching but found nothing. My message center fills up with these messages when running Civil Accudraw. Is this normal and is there a way to suppress them?
View ArticleClik here to view.
OpenRoads (Geopak) End-Area Volumes problem
Hello,I am having a problem with my corridor design surface not showing up in the General area of the End-Area Volumes tool. The exisitng surface is listed but the corridor design surface is not...
View ArticleALG Viewer in Corridor Modeler - No option to delete an alignment from the ALG?
We are currently using SS2 Geopak 08.11.07.566. Apparently in this version the option to delete an alignment from the ALG file has been removed, It used to be under the display/undisplay options. Does...
View ArticleMX Road Volumes
I've never had to do this before and struggling to achieve this - and I've got some time pressure....I have a road design for an access road through a steep site. I have 4 strata levels defined as...
View Articleextract from 3d slope
HiIs it possible to extract lines from 3d slope made by 3d geometry tools?I have PowerCivil ss3 for DenmarkregardsSigfús
View ArticleBoring Profile Issue
I've noticed that if I place borings in a profile using Borehole Navigator, relative to a profile cell and then place the same profile cell gain, at a different location in the model, when I place the...
View ArticleDraping Points onto Terrain Model
Is there a way to drape Civil Geometry Points onto Terrain Model? I want these points to have ground elevation or be vertically ofseted from terrain model.With InRoads COGO points that was very easy....
View ArticleClik here to view.
Surface Template material classification
I applied to a terrain model (feature definition sets volume option as:substratum) surface templaters limited with boundries. Feature Definition for templates's components have volume option set to...
View ArticleCivil Cell Keyin
Is it possible to pass the name of a civil cell along with the keyin "geometry civilcell place" so you can bypass the "Place Civil Cell" dialog and go directly to the placement of the defined civil...
View ArticleSolids in Corridor Modeling (Target)
Is it possible to have End Conditions target MicroStation Solids. It seems I have seen this done somehow but not sure what the process is. Do I need to get the Solids into a Civil Model as a name...
View ArticleGeopak SS3 Civil Cells
We seem to be having an issue when placing a civil cell. We can create the civil cell without issue but when placing in our corridor it does not behave like we need it to. I have attached a zip file...
View ArticleSS3 Feature Definition conflicts in multiple DGNLIBs
Through extensive testing, I am not able to clearly determine if there is an order of precedence when DGNLIBs load (content management) FDs. We have our site/user/project DGNLIB in which I was hoping I...
View ArticleLimits of Construction
On a roadway I am designing using Corridor Modeling & Roadway Designer I am unable to generate the limits of construction. My proposed templates are created properly (I believe) with one of the...
View ArticleOverlay Component Cross Section Display
I'm having an issue with overlay components displayed in cross section. The component works as it should in the roadway designer, projecting to the surface at a depth of half an inch. However when I...
View ArticleClik here to view.
Draw Shapes for Roundabouts in Geopak
Hi,How to draw a Shapes for Roundabouts in Geopak. i am trying with shape Maker tool its, i have attached the error message snap. Thanks in Advance,Ganesh Chatrad
View ArticleClik here to view.
Corridor Design Stage templates missing
HiI have have only "Default Design stage" template to choose from for my corridor. Is the templates .xin depended? Because I am using .xin file coming from my country´s Bentley user-group. If it is...
View ArticleHow to shade surfaces of triangulation
Dear All,This tool is there in fly through not found in actual mx work place window. I mean fill or shade triangulation to find unusual levels, Regards,Sreenivas
View Article[MX V8i SS3] Licensing issue
Hello,I'm back to company after a six weeks long absence and I've encountered an issue during MX first launch. It says there is no license and program will terminate in 15 minutes (screenshot is...
View ArticleMedia File Icons - Can they be toggled on and off & how about batch additions
Using PowerGEOPAK SS3 08.11.09.674When I attach a media file to a survey point in "Survey" it is indicated by an icon on the point, which when you scroll out obscures the point. Is there a quick...
View ArticleProblems showing existing storm drain pipes on the sections. - Geopak SS3
I am attempting to show existing storm drain pipes on the sections. I created features and element templates for the pipes. The element template uses a cell for the pipe.Everything appears correct in...
View Article