Merging Survey Data with attached images
PowerGEOPAK SS3 .722When we have two survey .dgn files with media files attached to individual points we are unable to combine them and have the image files stay attached to the media icons, which are...
View ArticleInRoads Ss2 Roadway Designer - Copying Corridors
I have some questions. First, some background:On my current project, started by others, the IRD has grown so big that the Report Browser routinely fails if I try to review its contents by loading the...
View ArticleClik here to view.
What Are The Previous Product Restrictions For Installing Ss4 - Specifically...
I have been unable to install Power InRoads Ss4 on a PC with Power InRoads Ss2. This Windows 7 Professional - 64 Bit PC had Power InRoads Ss3 installed with Power InRoads Ss2 and there were no...
View ArticleInRoads Ss2 - Orphaned Tags from Certain Workflows
I find myself with files displaying orphaned tags when executing certain workflows. Unfortunately they only become visible after I close and reopen the file. So I can never nail down the actual...
View ArticlePOWER GEOPAK-GPK FILES
Hello,I am using Power Geopak v8i SS2.I was handed a project from our local DOT and it contained two *.gpk files with different prefix names. When I set-up my project, it is looking in the directory...
View ArticleGEOPAK-PROJECT
Hello,I am using Power Geopak v8i SS2.When I set-up a new project, I am only setting the pathing requirements and *.gpk files to be used for each project. The project itself (*.prj) file does not...
View ArticleGEOPAK-GPK FILE DATA
Hello,I have set-up my project and *.gpk file pathing. I have opened the Graphical Coordinate Geometry dialog and Navigator dialog. When I select the Element selector, I do not see any information...
View ArticleGEOPAK-SDMS AND ASCII POINTS
Hello,I am using Power Geopak v8i SS2.I am using the Coordinate Geometry Navigator and selecting points, then viewing the points and selecting export. The export option is: SDMS Points or ASCII...
View ArticleGEOPAK-COORDINATE GEOMETRY POINTS DISPLAY
Hello,I am using Power Geopak v8i, SS2.I am using the Graphical Coordinate Geometry Navigator dialog to select points in my *.gpk file and display in the dgn model. However, the points display in a...
View ArticleComponent quantities report - how to get three decimal figures accuracy?...
Hello,Could you help me with achieving three decimal figures accuracy in my corridor volumes report (for areas and for volumes)?For my current corridor I have noticed that the information for the end...
View ArticleIs there a way to extract "transverse features" in SS3?
I was hoping to be able to extract a "pattern line" equivalent from my model in order to use line strings to generate traditional cross sections. In SS2 there was a way to generate Transverse Features,...
View ArticleGeopak Drainage, "Can't open source file" error
I have a user that is in an isolated office and is working on files in another office. When he tries to open drgmsg.txt he gets this message. He should have rights to modify this file over the wire,...
View ArticleSELECTSeries 4 Questions
I have a couple of questions regarding the new Civil release, especially with the Geopak version:Can the SS4 version be installed on the same computer with the SS3 version?If existing civil data is...
View ArticleConnecting two pipes to one inlet. Bentley S&S
I am trying to put twin 24" pipes leaving one wall of an inlet. How do I keep the pipes from both connecting at the middle of the inlet, and make them side by side?
View ArticleClik here to view.
Cross Section for Quantity
Hi, i am looking for a illustration or sample input to create a cross section which would allow me to calculate cur a& fill quantities as per the drawing file attached.I have tried using sectioning...
View ArticleWhat imperial unit format (decimal or engineering unit) are you using for...
Happy New Year!I have noticed that the civil drawings in imperial units mostly were using feet in decimal format especially for profile and cross sections. In my opinion, using engineering unit format...
View ArticleOpenRoads/InRoads Ss4
What is the best process to bing a surveyed feature into a DGN file and convert it to an alignment so I can display the stationing and then run a Station-Offset-Elevation report from it to a set of...
View ArticleClik here to view.
Geopak SS2 RD Draw XS From Surfaces - Missing Linework
Not sure how to explain this issue, but here it goes. I have Roadway Designer setup with multiple corridors (mainline, intersecting roadways, culvert with ditch). When I draw surfaces and have it...
View Article