OpenRoads - viewing profiles of multiple parallel horizontal alignments
Can you create a profile view with profiles of multiple parallel horizontal alignments?As an alternate, can you display offsets of a profile in OpenRoads?Thanks,Paul
View ArticleGEOPAK-BOREHOLES: GRAPHIC GROUP NUMBER
Hello,I am using Power Geopak v8i SS2.I have imported boreholes from gINT and while the borehole dialog is open and boreholes selected for placement in plan view, I select the MDL Application...
View ArticleCustom Civil Report Browser Stylesheets
Can anyone give us some idea how to include custom Civil Report Browser stylesheets into the normal list of Bentley supplied stylesheets? It would be nice if there was a multi- directory...
View ArticleSMD database location
How to change database Folder from C:\Program Files (x86)\Bentley\PowerCivil V8i\PowerCivil\Civil\bin to anything else.?When i open Plan Preparations->Place SMD Feature it opens the right SMD file...
View ArticleGeopak V8i SS2 08.11.07.625 earthwork undercut issues
I am running earthwork on a cross section file and I am having issues with some of the undercuts randomly not being read from section to section or sometimes within the same section. This project and...
View ArticleCIVIL_XIN_FILE pointing to local hard drive not file on Project Wise
Using InRoads SS3 and Project Wise SS4. Defined all the variables for InRoads SS3. All working fine except for CIVIL_XIN_FILE which points to c:\ProgramData\Bentley\Civil\InRoads\8.11\en\civil.xin....
View ArticleUsing ICS files with InRoads Bridge?
Is it possible to use *.ics files to establish bridge geometry for use with InRoads Bridge? We would like to use InRoads Bridge, but would like to have documentation for the calculation book that...
View ArticleSS4 - How to determine which elements depend on a reference?
When trying to detach a reference in SS4 Geopak I get a warning that the reference has probable dependencies. Is there an easy way to determine which elements are dependent on particular references?...
View ArticlePAVEMENT AND SUB GRADE DESIGN
Can any body help in pavement and sub grade design, when i go through the pavement and sub grade design,while first i am copying the existing carriageway edges to design model after i am selecting the...
View ArticleClik here to view.
Terrain Model Issue
I have seen a particular terrain model issue crop up for several users. I already know what the fix is; but I want to understand how this keeps happening, and to try to prevent it.We are using Power...
View ArticleRoad application receive error 0, errno = 42
Not sure why I get this error. I have some people that can use the D&C tool to bring in profile info and others get this message. GEOPAK SS3 08.11.09.722 inside of projectwise. Also have random...
View ArticleClik here to view.
VERTICAL PROFILE
Can any one tell, how to slove this errorThe lowest point of your profile has changed, would you like to calculate a new intersection point using new lowest point?
View ArticleI have a horizontal alignment using only simple curves. I want to add spirals...
I have a horizontal alignment using only simple curves. I want to add spirals to some curves. Is there an easy to do this in SS4?
View ArticleEnd Condition Properties--enhancement recommendations
As a new user (going on four months, now) to Microstation SS3 and Geopak SS3, in my efforts to figure out how best to effectively develop my templates, I found that a less-than-working knowledge of End...
View ArticleMissig "Terrain Model" tools.
I'm using GeoPak Survey to edit a terrain model. I used to have a bunch of tools under the Terrain Model tool bar and now only 3 show up. Where did the other tools go and how do I get them back?
View ArticleClik here to view.
Open Roads > Survey tab > Fieldbook > Export to > DGN Graphics
Is there a way when using the export to DGN Graphics command to set it so that it doesn't automatically open the new DGN file and close the current DGN file?
View ArticleClik here to view.
Component quantities aren't good at all PowerCivil SS4
Hi,Strange things happens when I model a roadway with two components see image.How do I know that my volumes are correct? Thanks in advancePowerCivil for country 08.11.09.789 SS4
View ArticleHorizontal Alg Displaying Letters at Beg and event points
Hi,When I view a horizontal alignment, a 'B' displays at the beginning and end with 'A' at event points. I cannot find the setting to not display these letters. I know it can be set in preferences but...
View ArticleGeopak & InRoads
Can the "Load_Geopak_SS2" and "Load_InRoads_SS2" variables be defined or called up within a client based ucf? We have multiple clients that require either Geopak or InRoads so we need to have the...
View ArticleInRoads Ss2 - Drafting Place Plan Note Issue
Working on a large PW project with many users from many firms. We have "master" contour files that users reference when they need contours for display. However, there are corridor based DTM's and other...
View Article