Geopak Drainage - Incorrect Junction Inverts
Hello,I'm currently setting up a profile with known pipe and manhole inverts. I'm able to set the pipe inverts in the link configuration box, however the manholes inverts are being shown at Elev 0.00....
View ArticleLocked Civil Elements
How does one make copies and offsets of elements created in openroads? We are dealing with 'locked' civil elements and just want to offset the ROW to make easements and place in Level D as-built...
View Articleexport DTM to trimble
I have version8.11.09.493 which doesn't have the "export to Trimble" function and am unable to get the new newest version of Inroads; a bureaucratic problem, and was wondering if there is a MDL created...
View ArticleClik here to view.
End Condition Exception Issues
I want my tie slope on all my end condition exceptions to be 2:1. Â But it seems they start out at 2:1 and get flatter (like -39%) until the stop station. Â Any help would be appreciated. Â I do not have...
View ArticleProfile from referenced Corridor - Why is this such a battle!
Running the latest Geopak/ Inroads 08.11.09.845 and even though this version maintains a triangulated top surface in the background the profile from surface tool STILL creates a broken profile that...
View ArticleClik here to view.
MX Won't install
Hi,I've downloaded the latest version of MX Road but it won't install see image. Bentley MX V8i Netherlands (English) x86 08.11.09.79006-03-2015 1652 MB
View ArticleDisplay of existing gates to vertical alignment.
How can I display existing gates to vertical alignment?
View ArticleMX Error E0801 "Inapproprate string type for option"
Afternoon,Long time lurker, first time poster :)Never seen this error before using MX(V8 XM Edition)Im trying to run a Dynamic Report, perpendicular with curve fitting on, but the abve error...
View ArticleSimplify Objects/Lines
Hi, I am trying to simplify a line, or more clearly, reduce the number of nodes on a straight line so that there are only nodes on the end of the line.I am currently saving the .dgn as a .dwg and using...
View ArticleClik here to view.
Target Aliasing variable notification
I have an end condition on my template that is targeting linear vertical "A". Â I have the verticals in the same profile view as my mainline that is used to create the corridor. Â I used the corridor...
View ArticleClik here to view.
Associate Superelevation to the Corridor questions
A.) I am having a problem with associating my super to the corridor. I am in the Active corridor file. Not sure if this is correct or not. If I am in the active superelevation file I cannot identify...
View ArticleClik here to view.
Reprojecting of referenced corridor and alignment data gone wrong
I am trying to build up a project that crosses many state plane zones of California. Â I wanted to reference in Zone 3 files into a host Zone 4 file. Â I did so by using the Geographic tool. Found these...
View ArticleInroads drainage SDB file editing outside of Inroads
I have two separate inroads drainage files that were created for two separate drainage systems (A & B) of a project. Now, I am trying to analyze them together since system B outfalls into a manhole...
View Article[PowerCivil .789] Alignments are locked for other users even if alg file is...
Hi.We noticed a change in the write lock behavior when we switched to from InRoads SS2 to Powercivil SS4. We usually have read-write access as default, but when another user tries to access the...
View ArticleClik here to view.
Existing Carriageway in Cross section
I want to include existing carriageway layers with below cross section, is there any line mode command. I have created the below cs by line mode.Design Model Name: Design 0 to 28FTria Model Name: Tria...
View ArticleTurn Off Unwanted Levels in Dynamic XSEC View
When I display my xsec's in modeler there are unwanted levels on. I turn the levels off and things look fine but when I advance to the next xsec all levels are back on. How do you turn off the levels...
View ArticleClik here to view.
Creating a Civil Cell in InRoads SS3 - "Element is invalid for this tool"
I am creating a civilcell of an intersection in InRoads SS3.I have created my reference lines and construction lines. I have tested this many times by moving the reference lines and all are working...
View ArticleSet varying lane width when creating superelevation
Is there a way to specify a varying lane width when creating a superelevation section? As far as I can tell SS4 only prompts for a single width for each lane. I've got a situation where I need to apply...
View Article[Geopak SS3] .NET error: Base geometry is null.
.NET Framework error in Geopak SS3, .722. The trigger here is probably also contributing to another fatal error which I'll mention.Here's the background: I'm going through my CADD files to see that...
View Article[v8i vba] inRoads/PowerCivil SDK. Function to get alignment "state" value?
Hi all,By "State" I mean, something like "Existing", "Proposed", "Destroyed".Please have a read and reply to this question over in Programming - As you probably know more about ALGs and DTMs than they...
View Article