Clik here to view.
[IR Ss2] Roadway Designer Bug - Wrong Bend with Secondary Alignments at...
On a current Project, I have discovered this bug. It occurs when you are using a point control via an alignment that is set as a secondary alignment but the direction of the alignments are opposite...
View ArticleClik here to view.
Open Roads Display Superelevation in Plan
I am having difficulty with the "Display Superelevation in Plan" tool. The tool displays superelevation as shown below from my coworkers computer. In the same file, on my computer the tool displays...
View ArticleClik here to view.
Is the TIW importer broken?????
The TIW format appears to be working when you parse the raw data in the tool. However post import review of the data shows a small but extremely serious flaw. I have a support ticket in with tech...
View ArticleClik here to view.
Clipping Options when creating a surface not showing any entries
I have 2 corridors that intersect which I'm trying to model but when creating the surface, the Clipping Options dialogue is blank. It seems to be trying to blend the 2 corridors together where they...
View Article[OpenRoads SS3] Civil AccuDraw set origin
Using Geopak SS3 .722, I'm finding that when I have certain tools activated and I try to change Civil AccuDraw origin, Civil AccuDraw behaves strangely. I'll give a couple specific examples:If I have...
View ArticleProfile / D&C Manager Question
PowerGEOPAK SS2I have created profile and it shows up in GOGO Navigator however it doesn't shop up in D&C Manager. Any ideas? As always, many thanks in advance
View ArticleRoadway Designer DTM/Surface Size Limitations Causing Process to Freeze?
Running SS2 Version 08.11.07.443Geopak V8i SS2 07.11.07.619Memory StatisticsElement: 60.2M, 529 BlocksAvailable: 28688M (Physical), 3240M (Virtual)System: 32694M (Physical), 4096M...
View ArticleClik here to view.
InRoads v8i SS2: Surface triangulation issue
Hello all. I am having an issue creating my surface. Everything looks fine in my modeler but when the surface is created, the contours do not look correct. I turned the "triangulated surface" display...
View ArticleClik here to view.
[Geopak SS3] Active Chain Control and Civil AccuDraw report different stations
Here you see that I'm snapped to a right of way marker at 344+25, 75 feet left of the baseline which is the gray line below it. (There's another baseline shown as well, but that has completely...
View Article2016 Bentley LEARNing Conference
Where and when will the Bentley LEARN conferences be for 2016? Just trying to make plans so I can attend.Thanks,
View ArticleClik here to view.
Driveway Civil Cell Placement errors in 3D
Driveway Civil Cell. I have created a Civil Cell for placement in my corridor. The cell is working properly when tested. It has 3 reference lines, front, middle and back all in 3d.This is the 3d...
View ArticleClik here to view.
Project Explorer Settings Openroads SS3
What does it mean when these reference files are "greyed out" When using InRoads in some prompts InRoads is looking to identify certain models like the proposed. I my case I ma attempting to create a...
View ArticleIs there a way to lay out a gutter in InRoads?
I am laying out a gutter along a road and there are some inlets on the gutter as well. I would like to model this in a way so that the gutter and inlets are connected as a system.I do realize we can...
View ArticleExisting drainage model vs Proposed drainage model in InRoads v8i Select Series2
For this project we have existing drainage model which I laid out already and the proposed one to be laid out. I plan to do the proposed model in the same SDB file with the existing one. Some of the...
View ArticleConvert a Digital Terrain Model (DTM) to a solid
How do I convert a DTM to a solid? I have the triangulated InRoads surface (DTM) and I need to convert this to a solid so I can print a 3D model of the surveyed surface.Thanks,Paul
View ArticleCopying a superelevation line in InRoads SS4/OpenRoads
Is there a way to copy a superelevation control line/points. For instance I would like to copy the superelevation I created for the Left edge of pavement and have the same superelevation for the...
View ArticleClik here to view.
Question about importing surface "from graphics
I have a question about importing surface "from graphics". in inroads. When I try to importing the slope bottom points into surface "BY LEVEL", I got 39 points imported which also included slope top...
View ArticleMinor option 303
Can any one explain where do we use where do we use 303 code in input method.
View ArticleHow to convert from inroads dtm to IFC File
HiI have a question about how to convert an inroads dtm file to an IFC file to be used in BIM software. Thank you
View ArticleClik here to view.
Hydraulic Analysis Problem
When I start SS4 I am now getting this Nagging pop upI am not trying to use Hydraulic Analysis.Joe
View Article