Clik here to view.
SS4/ Openroads orphaned components in 3D view can't be deleted
I'm working with SS4/openroads. There are old components showing up in all of my views. They are not associated with my corridor and I cannot delete them. How can I get rid of them? And what may have...
View ArticleLeft Turn Median Civil Cell (Open Roads)
I am new to the software, but have been playing around quite a bit with the civil cells and have watched the tutorials/videos.I have a median with left turn lane civil cell, with a ditch in the median....
View ArticleClik here to view.
Geopak - corridor properties unable to change design stage(s)
I seem to have lost the ability to change the design stage of a corridor.When I attempt to change the design stage via the properties menu of the corridor I receive a much expanded list of properties....
View ArticleHelp with Project Extended Profile Command
I am trying to figure out the Project Extended Profile command and am not having much luck. I have created 3 connected alignments (line, arc, line). I have opened profiles on each. I click on the...
View ArticleHow do we convert GeoPAK SS3 Drainage into the new GeoPAK SS4 StormCAD?
We have just updated from GeoPAK SS3 to SS4, we had been using GeoPAK drainage with SS3, how do we move this information forward into GeoPAK SS4?I understand that SS4 includes a 100 inlet StormCAD...
View Article[IR Ss2] Strange Behavior Review COGO Points - Center View Not Available in...
Working on a project using COGO Points and was asked to perform some quick plot of another project. So I opened a second session and was reviewing some COGO points in this project before plotting. On...
View ArticleStop loading Subsurface Utility Design and Analysis
Running InRoads Suite V8i SS4 V08.11.09.845. On my last upgrade, Subsurface Utility Design and Analysis must have loaded a trial version. Apparently a separate license is required for this product....
View ArticleGeopak Drainage SS3 Spread
What is the best way to model spread on a section of roadway with bump outs using Geopak Drainage SS3. It seems like no matter what I do the design calcs don't like me. Should there be information from...
View ArticleEdit Vertical Geometry
Hi all,I am a bit of a novice to in-roads (am using PowerCivil SS3) and have yet to find out how to achieve this...I have a horizontal alignment (control line for path) that I have draped to a surface,...
View ArticleRoundabout - 'component quantities' vs 'end area volumes'
Hi,I have created a 3D roundabout model using 'create corridor' option and a standard template. I have noticed that the volumes reports for the components I got from 'component quantities' and 'end...
View Articleabandon pipes
Is there a way to abandon or block some of your pipes so that rainfall would not go into those pipses when you do flow analysis in InRoads Suite V8i SelectSeries 2?
View ArticleWhat are the capabilities of COGO points for Open Roads?
I recently completed a task that took advantage of COGO points in Power InRoads Ss2. I have found a myriad of traditional and non-traditional uses for COGO Points over the years.Over time, as I...
View ArticleCreating a Surface Perimeter in OpenRoads
I was wondering if there was a simple way to just display a corridor's perimeter like the Surface Perimeter command did in SS2? I realise that I could export out the surface to a DTM and do it through...
View ArticleChange component style in Openroads SS3. Need to see updates
I have my corridor displayed and realized I need to change the style of a barrier component. I made the changes to the templates and saved them. I went to the project explorer and synced the templates...
View ArticleClik here to view.
How to get Super Elevation Lanes to Follow Tapers (GEOPAK 08.11.09.722)
How do you get the super lanes to follow a taper. See below.
View ArticleReplace survey point codes with project specific descriptions
Someone posted an article about how to do this last year in OpenRoads Survey....
View ArticleAuto-generated points when importing breaklines?
Version : InRoads V8i SS3.I used Terrain Model - Create Terrain Model From ASCII File to generate terrain.I have multiple breaklines in a single terrain. When I import the points as breaklines, there...
View ArticleIn OpenRoads How can I get slope pattern to show Cut or Fill?
Is tipically required on Civil engineering plans to show Cut or Fill grafically drawn, they should have a color for Cut and another for Fill, they may be used to representate changes of stratum by...
View Article[MX V8i SS3] Plan annotation *.pss
Hello,I need to annotate in plan a geometry string on curves with such content:preceding transition A value / preceding transition length curve radius following transition A value / following...
View ArticleDesign and Computation manager
I am working with manage workspaces in ProjectWise. One issue am having is accessing the DDB's files in Geopak. Even though I have set up the GPK_ACBOOK_DDBFILE and GPK_ACBOOK_DDBFILE_STYLES variables...
View Article