Modeling A Gore GEOPAK SS3 (08.11.09.722)
I have two models, one for my ramp and the other for mainline. What Is the best way to model the gore between the two? Are there any videos or documentation somewhere out there. I can only find info on...
View ArticleStormwater and sanitary sewer networks in SS3
We are looking at trying to use more tools within Geopak, specifically the Stormwater and Sanitary sewer (S&SS) tools. If we use Geopak SS3 OpenRoad tools for our roadway layout, design, and...
View ArticleClik here to view.
Shoulder Subbase Variable Thickness
I have a simple question...I think. I have an overlay template in which I have leveling. My shoulder subbase thickness is 6" but in the areas where I have leveling I am not meeting the 6" requirement....
View ArticleSUE - Extracting Utilities from Graphics
Using the Inroads Suite SS4I have my surface loaded and showing the contours and trianglesWhen I use the Extract Utilities from graphics command, the system asks if I want to use 3D element elevations....
View ArticleI can't find PowerCivil Import menu for PowerCivil for NorthAmerica V8i...
I can't find PowerCivil Import menu for PowerCivil for NorthAmerica V8i (Select series 4)
View ArticleOpen Roads SS4 feature connections thru link code and point list
What is the difference between the feature generated by point list and feature generated by link code in openroads SS4. when I connected the featured by point list I have duplicate lines appearing....
View ArticleCorridor Components
Is there a way to take SS4 corridor components (i.e. pavement layers, curb, sidewalk) and import them into a .dtm?  Similar to how the "old" roadway modeler would drop components from a corridor into...
View ArticleGEOPAK Contours not displaying at even/whole elevations
I have used Geopak for about 5 years, recently I've had a problem when I generate contours from DTM/DEM points and breaklines. The contour lines generated are not an even value. (eg: 500' contour reads...
View ArticleSue - Gas Conduit End Caps
Chris / RobertFirst , thank you for all your help it's really appreciated. Today I have another question ! When creating a 750mm High Pressure gas line the system adds some end caps, can you please...
View ArticleChord Definition in OpenRoads
Under settings/design file/Civil Formatting I changed the radius settings to Chord.  My question is how to layout curves by typing in a degree rather than a radius?  Also, is there a way to display DOC...
View ArticleLearn Server On-Demand Training
Greetings...this is my first question in this community and I hope I'm generally in the right place.I'm a long time ACAD/Carlson and ACAD/C3D user. I've been a surveyor for about 40 years and have a...
View ArticleAnnotate alignments at set intervales
Hi, Im using SS4 power civil and would like to create a layout that shows setting out points on 3D alignments at 5 m intervals (XYZ).This seems easy and I can resort to a manual method i.e. placing...
View ArticleCut/Fill Report from Isopach Surface
Hello,I am using Power InRoads SS2. For one of my project I need to show the final cut and fill quantities between proposed and existing surfaces. Initially, I am given ex. surface area about 100 sq...
View ArticleCut/Fill Report from Isopach Surface:
Hello,I am using Power InRoads SS2. For one of my project I need to show the final cut and fill quantities between proposed and existing surfaces. Initially, I am given ex. surface area about 100,000...
View ArticleClik here to view.
Station in Cross Section view
helloI can't change station in cross section view, because there are no buttons. The problem came after installation Power Civil SS4 version. Best regards.
View ArticleCorridor with shifting slope
HiI have a corridor where there is a slope to the left side ca halfways of the total length, then from there it change to slope to the right. How can I do that so be with a smooth shift from left to...
View ArticleSS2 AND PowerGeopak SS4 install
Can I install PowerGeopak SS4 on a machine that already has SS2? also, is ss4 backwards compatible? Essentially, I was hoping I could save it back to ss2 format.
View ArticleMesh Question
I want t create a grid (50x50) or a mesh surface and then drape it over another surface. How would I create such a surface and also, is there a way to then get X, Y and Z coordinates of each grid or...
View ArticleClik here to view.
MX SS3 and SS4 style set editor - RTE35602
Hi AllHas any experience issues with MX SS3 and SS4 style set editor - (RTE35602) when trying to edit.When using vanilla MX the style set editor works ok....but when your make change to MX setup be...
View ArticleCannot save Cross Section Preferences in Geopak
I am working on creating a set of cross sections, but I cannot save the preferences that I am entering. When I open the Preferences window from the Create Cross Sections window, the Save. Save As...,...
View Article