Write Survey Data to Graphics as Single Cell?
Can someone remind me where the check box for this option is?
View ArticleInRoads - Tracking, Clearance Report - Finding Wrong Station and Offset
I am working on median modifications and need a report of offsets from an edge of road alignment that doubles back on itself. Certain points report the offset and station from the far end of the...
View ArticleRoundabout Tutorial
(Posted on behalf of BE Communities Member)Is there a tutorial or video available for Roundabouts?
View Articlerofile
have create master string but due to change of centre line have spli into two string now i am facing problem in creating profile 1st string ble to create the profile(with ground )but in the 2nd string...
View ArticleSS2 Reading Plan Graphics From Different Project
I have two PowerGEOPAK SS2 projects going at the same time and they are on two different servers. I have started the new project and created plan graphics. Both projects have the exact same name for...
View ArticleInRoads V08.11/07.494
In the dialog for labeling contours "Text Symbology" the field for changing the justification of the text is greyed out is there a way to change the justification?
View ArticleSS3 GEOPAK - Cross Slope Optimization tool
I am trying to perform cross slope analysis using SS3. In SS2 you could put Roadway Designer into Overlay Mode to generate cross slope optimization reports. I cannot find the button to push that would...
View ArticleClik here to view.
Component Missing Materials
I am running into several occasions now where, after processing the corridor, the components appear to lose the material definitions. The material is defined in the element template and everything...
View ArticleOpen Roads Point Symbology
The open roads horizontal geometry point tools seem to be lacking symbology settings. The feature definitions are defined in the xin file including cells and annotations but when placed only the cell...
View ArticleMX SS3 and XIN
HiI'm an MX user moving to SS3. Currently I'm in the process of customizing the settings for our company. We have little to no legacy as our pss files were made by hand so we need to build the dgnlibs...
View ArticleTIN does not match Roadway Designer
The TIN I create from from roadway designer does not match what is in roadway designer. The elevations differ by as much as 6' between the TIN and what is roadway designer. However, when I create...
View ArticleStorm drain pipe size design in Power Inroads
I run into issue that I input all my Manholes, Inlets, minimum 15" pipe size, Drainage areas for all Inlets into drainage file. I run Drainage->Network->Design. But result is nothing change and...
View ArticleDEM to Solid
Hi all, I have been trying to get this to work for days now and have not been successful. I am using Global Mapper to export elevation data to a .DEM file. I've created a new surface and imported...
View ArticleClik here to view.
Annotate points on cross sections - Geopak SS3 08.11.09.674. (Corridor method)
I have created cross sections using Geopak SS3 08.11.09.674. (Corridor method)I am attempting to label the elevation of specific points.The “Annotate Label” function is not allowing me to select a...
View ArticleMX Road Volumes
I've never had to do this before and struggling to achieve this - and I've got some time pressure....I have a road design for an access road through a steep site. I have 4 strata levels defined as...
View ArticleClik here to view.
InRoads SS3 - Civil commands not available after install
After installing MicroStation SS3 v08.11.09.397 and InRoads SS3 v08.11.09.493 I am not seeing any of the Civil commands in my task menu.The machine I am installing on as a VMWare virtual machine...
View ArticleCreate Chain From Profile Grade Report
Is there a way to have GEOPAK (SS2) automatically create a chain from a profile grade report?
View ArticleInRoads and msxml parser
Not sure if this is the place to ask, but here goes:We're running MS 08.11.09.459 and InRoads SS2 (08.11.07.566)Our IT department retired msxml parser 4.0 sp3 due to end of life security issues, and...
View ArticleClik here to view.
Strange Feature Definition Behavior
When placing a line using any feature definition the program is creating several instances of the same definition, see below. Each time a new element is placed the list increases. Any idea what could...
View ArticleInRoads template not recognized as an End Condition?
Hopefully this is something simple. I have a 4-lane roadway template that includes guardrail shoulder component with 2:1 slope to surface, & a berm ditch component controlled by profile. Works...
View Article