I am trying to import roadways into my project using GeoCoordination. It successfully downloads the content but never imports into my file. I have let the program run for hours upon hours and it continues to say importing but does nothing. Any suggestions on what to do to solve my issue?
↧
Importing Roadways Issues
↧
城市道路
现在我通过无人机得到了osgb文件，而且现在具有道路设计图纸，我可以在通过无人机+CC软件处理得到的三维实景中建道路模型吗？ 谢谢您
↧
↧
Looking for plan production in OpenSite
David Settlemyer stated in the 2018 conference Opensite Keynote video that 80% of project time budget goes into producing the plan documents. I agree with that assessment. He also said the goal of Opensite is to transpose the time budget to be 80% design, 20% plan production. I would like to see how Opensite addresses that problem.
↧
Point Clouds
I have A LIDAR .XYZ file that I have converted into a POD file using point cloud 'convert'. I then attached the file using 'attach' in MXROADS select series 3 it attaches the file to the DGN file and displays it. In MXROADS select series 4 the programme tells me the POD file is 2D. Has anyone else had the same problem with series 4?
↧
Using a Cell as a Pattern not working for certain cells
Hello all,
I am having an issue with using certain cells as patterns in my files. I have attached the Patterns file with the cells in question, as well as our 2D Seed file to see if anyone can replicate my issue or see what may be going wrong. For whatever reason the Dots and Earth cells can not be used to pattern areas as far as we can tell. We can however use the RipRap, FM and CA files to pattern areas. Has anyone encountered this or know what may be going wrong?
Thanks,
-Daniel T. Warren
communities.bentley.com/.../Patterns.dgncommunities.bentley.com/.../HWC-Seed-2D.dgn
↧
↧
Profiles - Projected Features and Leader Lines
Hi,
I have two questions regarding profiles in OpenRoads:
- Is it possible to label projected features as in SS4? I need to label the levels along one of the kerb lines which could be done in SS4 by 'Update Profile' with projected features and then 'Annotate Feature in Profile'.
- How do I make the 'Leader Lines' intersect with my active surface and not the active profile? I have checked 'Draw Leader Line' in my 'Z along active surface' label, however in the long section they still intersect with the 'Z along active Profile'.
↧
MicroStation has always had the key in "act ang pt2" to set the active angle by two points. In OpenRoads Designer it says that is an ambiguous command. Did that command change or does it no longer exist.
Active angle by 2 points
↧
ConceptStation, Bridge placement is refusing to follow the horizontal curve alignment. Bridge is projected in a different location.
Version: 10.00.10.17
↧
Extrude a solid to a surface
I am attempting to draw buildings in 3D for a project. They're bare bones but I am looking for a way to extrude the solid I make to the surface I have in my file, currently they are extruded below the surface and it doesn't look the best
↧
↧
Active Profile Drawing production - Open Road Designer
Hi, In open Road Designer I am producing Profile drawings from the drawing production function.
I have more than one Vertical alignment for the same Horizontal, but only one Vertical is set as Active. Is there a way, without deleting any vertical alignment, to show only the active profile in the profile sheet and not all of them?
Thank you in advance
Vera
↧
ORD Crashes when Drop surface or Linear Template
Hello
MY ORD crashes during surface or linear template drop. The same file work on other colleagues workstations always every time and checked many times but crashes when i try to drop a linear or surface template on my workstation . The first thought was to reinstall the ORD again and check but had no success so updated the workstation to an advanced one (Thinkpad P52), but still when i try to drop a surface or linear template during Intersection and civil cell design , the software crashes. Any help would be really appreciated.
I am using ORD 2018 release 4.
regards
Ullah
↧
PowerCivil SS4 Workspace
Hi,
I am relatively new to this software and I wanted to have my workspace (User and Projects) in a different location than the default.
After followed all the steps shown at LEARN (https://learn.bentley.com/app/VideoPlayer/LinkToIndividualCourse?LearningPathID=109983&CourseId=115796&MediaID=5007190), everytime I try to create a Project or User, the program points to \ProgramData\Bentley\PowerInRoads V8i (SELECTseries 4)\WorkSpace\ and I cannot find a way to change it, even though I created the .cfg file that points to my custom workspace.
I tried to look up here but I am unable to find an answer.
Thank you.
↧
Transit from Openroad Technology models SS4 to OpenRoad Designer Concept station
Hi Team,
Can someone guide me on how to use/edit the models/dgn's which are created using OpenRoad Technology(SS4) to OpenRoad Designer concept station???
If this can be done, can you share the workflow and things to be consider during transition stage?
Thanks for the any help which you can give on this.
↧
↧
InRoads had a tool to locate a point by various methods (direction/direction; direction/distance; station/alignment; etc.). Is this tool available in OpenRoads Designer?
Locate a point by various methods
↧
Mass Haul Diagram
We are using OpenRoads Designer 10.7.0.56 2019 Update 1. Have a corridor with basic template. The existing Terrain model have been created with a DEM file in TIFF format. So far everything is good. We can see the cull and fill volume in the dynamic cross section window and have all the quantities when using the Corridor report component quantities.
We are trying to get the Mass Haul Diagram from that corridor. We are using the interval method. Even if ORD takes time to calculate, the report have 0 volumes and the diagram shows no profile.
The Civil Analysis is pretty simple........
The feature definition for the existing terrain, corridor and meshes are set properly. Existing and Design.
The feature definition for the diagram if the one from ORD metric workspace.
Why does the diagram won't show....
Regards
↧
ORD - Adding a driveway civil cell
I am adding a driveway civil to my proposed corridor. Only my back edge of driveway is located OUTSIDE the proposed corridor boundary. This is yielding strange results with the proposed corridor. Anything OUTSIDE of the Proposed Corridor when clipped goes to elevation ZERO. How can I fix this problem? Do I need to get the Back edge of the driveway into the Proposed Corridor? Yes, there is a profile on the back edge of the driveway set to the existing ground elevations.
Thanks,
↧
OpenRoads Designer Cannot Load Dialog Error Message
It would be nice if someone would make these error message go away. They are being generated by leftover cruft from SS4 in various DGNLIB files used for GUI/ . If you review these various dgnlib files you will find many entries under tasks which have broken links.
I found some of them in CifCommands.dgnlib, which reduced the message count from 8 warnings to 5. But I have been unable to locate the others. The warnings are probably harmless except for the generated phone calls when someone interprets the messages as "The world is on fire".
↧
↧
[ORD 2018R4] Enhancement Request - Annotation Group Management Utility
Good Morning,
I'm working on doing some fine tuning on our workspace and realized that there is not currently a utility to convert Annotation Group XML files to Excel, similar to the other migration utilities. It would be helpful to have such a converter, as I could hide columns and verify settings in several different Annotation Groups that should be similar (specifically Plan Annotation between different alignments). Also, I could do lookups to ensure that my Feature Symbologies are linked to my Annotation Groups via VLOOKUPS, much like I do with the other links between Feature Definitions, Feature Symbologies, Element Templates, and the Level Library. Currently, I'm using the snip tool and comparing line by line. Another possible option would be to use a program like Beyond Compare (which I just realized and will likely be requesting from IT after posting this). If anyone knows a more efficient mechanism to accomplish this or if there is a VBA utility out there, please let me know!
As always, thanks in advance.
Sincerely,
Robert Huston
↧
Asset Manager
Alguien que me puedea proporcionar informacion sobre la herramienta Asset manager incluida en OPENROADS y OPENRAIL Designer en el grupo Model analysis and reporting de la pestana Home del flujo de trabajo Modeling?
↧
Power InRoads
I'm doing some of the Bentley Power InRoads training. One of the modules I was hoping to go through is "Overlay, Striping & Widening"? All the lectures are available but no downloads that would contain the "practice workbook and the needed dgn files. Do you know where I might find them? Thanks
↧