Good Afternoon,
I saw this afternoon that 2019R1 was released last week. I've gotten the release notes from the help file, but can someone post the Workspace Updates PDF for 2019 Release 1 which is typically located at:
C:\ProgramData\Bentley\OpenRoads Designer CE\Configuration\Organization-Civil
Additionally, could there be any consideration of including this in the Help File under the Readme? This helps evaluate level of effort of upgrading for us.
Thanks in advance!
Please, I am a student and I am looking for free or affordable interactive or virtual platforms to learn Openroad/Inroad software. Any help would be highly appreciated. Thanks!
Is there already a Autodesk Vault plugin for Open Roads Designer?
Hello! I work on InRoads SS4 in Poland. I need raports in polish language. Is it possible to add folder "pl" in report browser? 
In revit we can create a lot of parameters is there the same methodology in openroads designer
Hi,
I've successfully created a simple driveway civil cell, and I've placed it at various points along a corridor and it's been working so far. However, on one occasion, the cell seems to want to connect the end points together, and it's creating an extra piece of pavement (see below). Does anyone know what may be off?
Thanks,
As often as not, when designing a site, buildings move, get larger etc.
I have a site that I want to rotate 1 degree ccw form a point. Is there an easy way to do this in ORD? in SS2, I would create a preference and do it using transform. My building outlines were all done using alignments, I offset to get the opposite sides and then made it into a complex and then ran a template around the outside. My site has multiple buildings, plus the buildings are growing. The growing buildings are no problem, moving and rotating the site is.
Do you have any suggestions as to an easy way to do this, rather than start over. Relocating the original alignments that I used to create the buildings is not working.
I am using ORD 2018 release 3.
Is there a quick way to select all objects that are set to a specific feature definition?
I want to warp the end conditions at the driveways as smooth as sketched in the image.
Things I know-
Things I need to know -
"How to smoothen both the end conditions, so it is seen as real"!
Experts guidance is highly appreciated.
Hi,
my goal is to assign Items to Feature Definitions in DGNLib which are uploaded from Asset management.xlsm file. So in that case later when I create corridor I can set item properties from pick lists with connection to ...Lookup.xlsx. Everything works fine in DGNLib but in every other file which loads Feature Definitions from library it crashes at moment of creating corridor (assigning Item). I know it's still Technology preview but maybe someone have a solution. Maybe there is some variable which loads Asset Management.xlsm? I have knowledge only about variable for Lookup which, of course, I am using.
Regards,
Krzysztof Jędrych
HOW DO I CREATE A MASS HAUL DIAGRAM ?
I was told to come here instead of tech support. I'm looking to download GeoPak V8I SS4 version 08.11.09.87
My company has a license and I need to put it on a new machine. Under Software Downloads, it tells me there are no GeoPak downloads available at all. Is anyone able to help?
Thanks,
Matt
Hi there,
I''m would like to export a dwg from a long section in a sheet model , generated by a drawing boundary and annotated by a annotation group.
This is the sheet model
after export the 3d cut isn't visible.
drawing model with references child references cached
How can i fix this ?
In the SUDA catalogue, I'm trying to import a xml file that was already created with inlet properties and I'm receiving the following error:
"1: near "s": syntax error
I'm getting the same message for different xml files.
We are working on an ORD project as a sub-consultant to another firm. We share terrain models, corridors, alignments, etc. Our partner firm is using ORD Version 2018, Release 4, Update 6 (10.06.00.38). We were considering updating our software to ORD Version 2019, Release 1, Update 7 (10.07.00.56), but before doing so, we would like to make sure that our partner firm is not going to have problems accessing data we are creating with the newer version.
Is there a possible compatibility issue between these two versions?
Thanks,
Christopher A Mexas
Power GEOPAK V8i SS2
I have a site model that is recognizing an object that appears to not actually be there anymore (it was at one time). It looks like the object might have been accidentally deleted from the model at some point in time. In my FIFO list there is an object "10-C" that is being built into the model. I have some shapes drawn in that area that I believe would have been used for this object. However, there don't seem to be any elements or objects anywhere that are associated with the model. The object "10-C" does not show up in the object list. I went through and highlighted all of the elements that are associated with the other objects just to see if an element was mistakenly put on a different object. Nothing. If I didn't want this object included, i would just remove it from the FIFO list, but I do want this object in the model. But as it is, I can't edit the object or the elements associated with it or even see the elevations. Is there any fix for something like this or do I just have to try to recreate the object from scratch?
Thanks
1. How the &*%^ does one place a Station Offset note with ORD?
2. is there any annotate tools that replicate the inroads .dft (place plan note) options, this tool was critical for us, we could customize so many labels however we wanted to display, most importantly, for this project now, I need to be able to grab a 3d line and label the rise/run. easy peasy with classic inroads...
I am naturally discouraged with any new software, I know ORD is new, but it seems this should in the geometry ribbon?!? also, why the hell is there so many SS3/SS2 topic popping up in the ORD forums?
Hello
This report is more my sigh then a question.
When I am learning or training new applications (more then 20 years), the documentation - help is very important source for understanding a software. I have to say, OpenRoads Help is not in good condition. OpenRoads Designer should be high level engineering software for our designers - technical experts, but its poor documentation doesn't match that. Often I can see here a list of commands only and expected content is missing. Or 1 sentence something like "<command name> does <command name>" is noted here. We can see it for example in new modul Site Layout or Asset Manager in 10.07 version. Blank list, we can guess only how to use it.
OpenRoads Designer is not cheap product and the Help should be a basic tool for application using. Very important for new users, but not only for them.
I think it is not so much difficult to write a few rows about purpose of new modul and commands, why there are in application, how to use them and to describe main parameters. Especially in comparison with amount of developing time.
Lot of users are confused without good Help. Webinars? Video for complicated workflow? Why not? Thanks. But detailed help is more then thousands videos and webinars. Bentley, please, wake up.
Sincerely,
Josef Uhricek
Can you do a volume between 2 surfaces but only above a 3rd surface in InRoads or OpenRoads. This can be done in Civil 3D
but can't see how that would be done in InRoads or OpenRoads.
On dynamic cross sections, I can't place the dimension between the right points. Please see attached screen shot, the dimension can't be placed between CL and EP. Does anyone know how to fix it? thank you in advance. BTW, I am using ORD 2019 release.
