Cross Section Sheets - Sheet Label Problem - SS2 Geopak vs SS3 Geopak
Cross Section Sheets - Sheet Label Problem - SS2 Geopak vs SS3 Geopak Begin Station / End Station Annotion Text Size ProblemI am producing the Cross section Sheets When I select the Begin Station / End...
View ArticleSurvey Field Book Dialog
Is there some sort of Survey Fieldbook dialog where we can browse down through the Station and Observations point by point and view the survey information such as Northing, Easting, Elevation, Code,...
View ArticleClik here to view.
There are no Cross Section Cell to process with regards to current settings.
I keep getting the message "There are no Cross Section Cell to process with regards to current settings" on GEOPAK when i try to draw my existing ground cross sections. It does allow me to place the...
View ArticleInRoads Ss2 - Roadway Designer - Superelevation Across Template Drops - Is...
He I am again - working with a project with more than 30 varying template drops with a number of curves needing super-elevation.I did not create most of these and apparently the people who did had not...
View ArticleClik here to view.
Contours in pond
HiI have this pond I have created, with horizontal geometry lines as breakline. But the contours is showing with strange zig-zag in some places. And at the bottom is also strange contour lines...
View ArticleAnalyze Volume Boundary?
Version : InRoads V8i SS3.I used the function Analyze Volumes in Terrain Model and It worked fine.Now I want to set boundary for the analyze volume. The box "Boundary Reset For None" appears, but I do...
View ArticleUnwanted corridor processing
I m getting my corridor processed even the padlock is opened (rule deactivated). This happens whenever I open dynamic corss-section view or add End Condition Exceptions.what is strange, when I attach...
View ArticleMultiple Users - Inroads SS2
It has been a while since I have had multiple users in the same alg file. Is there a way to lock the file as read only and the designer must check out the alignment to work in instead of the first...
View ArticleClik here to view.
Be gone tiny contours!
If one is familiar with what a LiDAR point cloud is, then they know that they are working with millions and millions of points. When creating a DTM surface from a point cloud, the resulting...
View ArticleCross Sections
Can any one help, how to get an difference in Existing and Design levels,while creating cross section, Mx-Roads(V8i) Select Series-2
View ArticleClik here to view.
Display problem/lines
HiWe have on one of our workstation a strange display situation.When opening a drawing there is lines all over the screen, on other machines everything is ok.regardsSigfús
View ArticleOpenRoads Survey Macro (PointCellDisplay)
I see some older post regarding Survey Macro example and help but nothing recent since the SS3 refresh. There appears to be no help available for the object reference...
View Article3d Linestring Material Setting
I am using the Bentley delivered workspace and the 3d guardrail line style to display guardrail posts. I have been successful in getting it to work but the posts that appear are just displayed by...
View ArticleClik here to view.
Annotate Feature - Inroads SS2
HiI am displaying the elevations of a surface using annotate feature but am facing a problem with how it is getting displayed as I want to have center the Cross Symbol "x" to be displayed in the...
View Article[Inroads SS3 *.674] No auto-attach to 3D when referencing terrain model.
Hi.I am working with corridor modelling based on a 2D seed file. When I am referencing a terrain model into the 2D model it does not get auto attached to the 3D model. Just to be sure I followed the...
View ArticleMINE CYCLE SURVEY
Hello,I am using Power Geopak V8i SS2.I watched a webcast recently by Bentley and the subject was "Mine Cycle Survey." Unfortunately, I did not have a chance to watch the entire presentation so I am...
View ArticleInRoads Ss2 (Power) Plan & Profile with PW Issue
I had trouble getting Print Organizer to work within PW so I made my sheets in a network folder, outside of PW while most everything else is inside of PW.I when to load a VDF file and while it allowed...
View ArticlePI Rounding in Power InRoads SS3
Is there a PI rounding tool or something similar in Power InRoads SS3?
View Article[OpenRoads Technology - MXRoad] How to design drainage using OpenRoads and...
Hi,I'm exploring the functionality on OpenRoads Technology on MXRoad (Inroads and Geopak is not favourable in Malaysia),I came across to design the drainage portion and stuck, I can't find any specific...
View ArticleClik here to view.
Contours looks strange - Inroads SS2
HiI created a surface using roadway designer but when I displayed the contours for that road it looks strange as shown in the picture and I am not able to discover what is the problem.
View Article