3D-model in seedfile
Hello!I am trying to make a ready seedfile with an internal 3D-model. This is so that when you create a corridor you already have a model that the 3D-corridor will be referenced into. The problem is...
View ArticleClik here to view.
Simple Template End Conditions not Working
I have a very simple driveway template with three end conditions (two for a fill situation and one for a cut situation). When using the template on different driveways, sometime the fill EC works, but...
View ArticleClik here to view.
INTERSECT A WALL WITH A SLOPE
I created a solid wall as a DGN file. In another DGN file I have my corridor. When I link the DGN containing the wall, I can cross sections cut perfectly and I can see the corridor and the wall. Now I...
View ArticleClik here to view.
Clik here to view.
Drafting Notes Computed Values - InRoads SS2
I am having a little problem with drafting notes. The highlighted computed value of the elevation is 23336.573. This elevation is incorrect. The actual elevation is 48.618. After some investigation the...
View ArticleExporting profile
I need to export a design profile that was created in open roads (geopak) to be used in Civil 3D. How do I export the profile?
View ArticleClik here to view.
Corridor Mysteriously Deleted in Power GEOPAK SS3 (08.11.09.722)
There is a phenomenon happening in my files. I have multiple corridor files in my working directory. When I open up one of the corridor files, the corridor has been deleted. Luckily I have a copy in...
View ArticleHow do I show Subsurface Utility elements, on an Alignment Profile?
We are working on a project and we have created our Tunnel Alignment, created using Power InRoads civil tools, and we have our Utilities created using SUE. How do we go about showing our Alignment and...
View ArticleClik here to view.
Corridor Modeling/ Overlay Tools For a Divided Section
Hello all. I attempting to create a resurfacing grade with a minimum 3" over existing ground. I have done this before with an undivided section, but not with a divided section. Using the Overlay...
View ArticleCOGO Navigator not displaying all points
I have a survey file with over 25,000 points and for the past two weeks of editing, I've had little problem with the .gpk file. However, this morning when I loaded Navigator in COGO, only a fraction of...
View ArticleNo Feature Definitions in Create Terrain Model
I am have difficulty accessing Feature Definitions in the Terrain Model tools, such as 'Create Terrain By Text Interpolation'.I am using GEOPAK SS3 version 08.11.09.459.We are working on a project that...
View ArticleDisplaying Cells on Cross Sections
Hello,I am trying to figure out the best way to display manholes, inlets, power poles on my SS4 cross sections. Most of the time these are not going to be located directly at my interval cuts. I am...
View ArticleHow to Create alternate Surface in Power Inroads SS4 V08.11.09.788
Hi,I have placed an alternate Surface name in my template, and processed the corridor, But couldn't find the the tool to create the alternate surface.has this tool been omitted from Power Inroads,or...
View Article[OR] Profile&Cross Section Annotation compared to [IR SS3] , How close is it?
Hi,I like to know the development status of all known Inroads SS3 Profile and Cross Section annotation possibilities (including annotation of features) in the OpenRoads Technology.And further: Is the...
View ArticleHow Can I export a Portion of a Terrain Element from a Raster DEM
I am trying to get a DTM in InRoads from an ERDAS IMG file. I need only about 10% of the coverage from the file. I cannot get the Scaleable Terrain Model to work in Descartes but I can load the ERDAS...
View ArticleExport Lat/Long of elements in a file
I've got some cells, which represent boring locations in my roadway design file with an attached geographical coordinate system. The borings were placed by Station/Offset. I would like to find an...
View ArticleClik here to view.
[IR SS4] Export to DWG - Batch Converter
Hi,I have a lot of .DGN files and I need to convert all of them to .DWG. I would like to use Batch Converter, but there is one big issue.All my Civil lines cutted in DGN are not cutted in DWG. There is...
View ArticleText in contours still not plotted
In a post, more than one year ago this was adresses: http://communities.bentley.com/products/road___site_design/f/5922/t/93412 .I also filed a question of mine in post...
View Articleprofile along wall that doesn't follow baseline
I have a weird situation that I'm not sure how to do using Inroads.I have a retaining wall that is on a curve that I need to show the "developed" elevation view of and display the baseline stationing...
View ArticleStorm & Sanitary - Pick which face of an inlet a pipe connects to
We use Select Series 2 Storm and Sanitary, sometimes for design and sometimes to generate storm profiles from manually computed structure elevations. On a recent site design I ran into two instances...
View Article