[MX SS4] Windows 10 problem on exit
Hello,I was appointed to check compatibility of a new MX SS4 8.11.09.845 with a new Windows 10 before changing workstations in whole company.At first everything was all right but after choosing "Close...
View ArticleOpenRoads SS4 Terrain Modeling shutting off contour displays every...
I'm going through creating my Terrain modeler and when I go to modify a corner of a pad it turns off my contour display. Is there a setting somewhere I can change it to say keep my display on? It's...
View ArticleSettings in OpenRoads SS4 to switch from FT3 to CubicYard when running...
I have tried searching on the forums, discussions, and blogs and can’t find my specific question. I'm in OpenRoads ss4 and running a Terrain analysis and notice if your working units are foot it'll be...
View ArticleOpenRoads SS4 Auto Balance cut/fill
Last question for today, is there somewhere in OpenRoads - Power In-roads SS4 to automate balance cut/fill for my Terrain model? Site modeler had this capabilities and would think Power InRoads would...
View ArticleGEOPAK-PROFILE IN REVERSE
Hello,I am using Geopak v8i SS2.I was given a profile that shows the high value station at the start, left bottom corner and stations in decreasing order from left to right; reverse direction from the...
View ArticleFeature Definitions with multiple .ddb files
Hi all,We have a delivered workspace that is password protected. I mean NOTHING can be added or changed. I am unable to add native styles to the delivered .ddb file.The workspace is specifically for...
View ArticleClik here to view.
Missing MS_GEOCOORDINATE_USERLIBRARIES Variable
I'm going through an exercise to create a custom coordinate system and it instructs you to set the MS_GEOCOORDINATE_USERLIBRARIES variable to the new dty file but when I go to Workspace >...
View ArticleWill current MS and InRoads Suite be certified on Windows 10?
Microstation V8i SS3 ver. 08.11.09.714InRoads Suite V8i SS4 ver 08.11.09.845I'm running the above listed versions of MS and IR on Windows 7. The window for the free upgrade to Windows 10 will be...
View ArticleClik here to view.
Earthwork Geopak SS3
When running Earthwork from my Cross Sections, I get a Topsoil Strip Quantity when in a Cut situation, but I do not get a quantity in a Fill situation.Any suggestions??
View ArticleClik here to view.
Issues with building a modified "Basic T" Civil Cell
Our client has a different design for it's side roads and entrances. Instead of a radius going from the mainline EOP to the entrance or side road EOP, there is a taper prior to the radius. Please look...
View ArticleRaster Image from Training program not attaching correctly
Hi,I am using the OpenRoads training files & video. When I bring in the MeadowPark.tif through Raster Manager it is coming in in the wrong coordinates & at the wrong scale. I'm currently using...
View ArticleHow can I make cross section along string MC10 (MAIN MODEL) that will show...
MX ROAD problem - cross section with multiple models
View ArticleClik here to view.
target aliasing in Corridor Modeler
I have a surveyed DTM and a LiDAR DTM listed in target aliasing, in order to make due until we can obtain more survey. In the attached picture, I am attempting to utilize a ditch grade on the right...
View ArticleClik here to view.
Inroads SS2 Superelevation about Inside Edge with Varying Lane Widths
My template contains lanes constrained with horizontal and slope constraints (11' and 2%). I'm also using point controls to vary the lane widths through certain areas of my corridor. (This is done...
View ArticleMX V8i Cross Sections
MX V8i - Cross Sections: I have created a large design model for widening an existing road to dual carriageway with one of the central reservation channels as the M-string. For some reason, when using...
View ArticleClik here to view.
GeoPak V8i Corridor Modeling - Cross Section Labeler Error
.I am getting this error message when I try to open the Cross Section Labeler in Corridor Modeling. I have checked the Workspace configuration and believe all of my configuration variables are correct,...
View ArticleCivil Cell
I created a driveway civil cell and have specific questions related to its visualization in the 3d view. Is there a contact at Bentley to whom we can pose our questions?Thank you,Cary...
View ArticleClik here to view.
GPK_AUTOPWJOBDIR
Can someone explain what exactly the GPK_AUTOPWJOBDIR Configuration Variable does? I have read the following description but it just make sense to me. If someone could help me understand what this...
View ArticleGEOPAK-RE-CREATE ALIGNMENT WITH NO GPK
Hello,I am using Power Geopak v8i SS2.I have been given dgn files with cross section cells but I have not been given a gpk file. If I want to see the alignment/chain the cross section cells were taken...
View ArticleDrag Handle
Hi,My Drag Handles are not working. Is there a quick way to switch these on?RegardsDaniel
View Article