Open Roads SS3 > Civil Tool > Terrain Filter > Graphical Filter Manager >...
I created several terrain filters and a filter group a week or so ago using the Graphical Filter Manager which is working fine. Today I went to create some additional filters to add to the group and...
View ArticleMilling/Overlay Component (PowerGEOPAK SS3 08.11.09.722)
Good Morning,I have a project where we are overlaying the roadway without milling, we are overlaying with a thickness of 7.5" on top of ex pavement. I would like to run a template that will run along...
View ArticleRe-triangulate Same Surface Over and Over and Over
I am doing a series of intersection sight distance triangles. I had cut initial profiles with the existing ground surface. Now I am trying to update the profiles to also show the proposed surface.For...
View ArticleCorridor Modeling Labeler Error
Having an issue with the labeler labeling all cross sections properly. About 90% of the sections are labeled and it seems that the other 10% of labels show up just not where they should be...i.e. STA....
View ArticleAlignment Naming Oddities (PowerGEOPAK SS3 08.11.09.722)
Good Morning,Just when I'm getting used to SS2 we move to SS3. One thing that I am having troubles with is my alignment names. When I create an alignment for one alignment, the name I give it sticks,...
View ArticleClik here to view.
OpenRoads (Geopak) Edit Horizontal Alignment
I would like to edit an alignment that has an active profile and I am having trouble understanding why I cannot edit a specific way.First screen shot shows original alignment (of course this alignment...
View ArticleOpenroads underground utilities on cross sections
Hello,This may be more of a Microstation question but I'm using the process with Openroads. I am using the "Solid by Extrusion Along" to create 3d existing underground utilities. I'll first use the...
View ArticleCompound Curve/Arc in MX ss3
In MX, how to create a compound arc between two straights/strings with levels as fillet string at junction which will modify the levels between 2 strings as well. This can be achieving through...
View ArticleClik here to view.
Open Roads SS3 > Create Terrain Model By Graphical Filter > Problem with...
Random Terrain Points (spot elevations) in our mapping DGN file are represented with a cell that looks like a white plus symbol as shown in the second screen capture below. I have created terrain...
View ArticleOpenroads not keeping symbology of cells when cutting crossing sections
We have cells that have different linestyles (using the built-in linestyles) within them. The cells look correct while viewing within OpenRoads, however, when exporting to native Geopak Cross sections,...
View ArticleCannot import profile into OpenRoads file to an existing horizontal alignment.
I am trying to work on a profile in Geopak and then import the vertical alignment into SS3 OpenRoads to an existing horizontal alignment. Every time I try to import, a new horizontal alignment is...
View ArticleClik here to view.
Features in Cross sections / annotations
Hi,Is it possible to get my Feature (rails) displayed and annotate in my cross sections?Thanks in advance, Christiaan
View ArticleStation Offset Command
With Inroads we have the ability to use the station offset command for precise input relative to an alignment. The syntax being:SO=Station,Offset,Elevation,AlignmentThis ability seems to be replaced by...
View ArticleOpenRoads - File Load/Reload
I have noticed that each time I enter a file with openroads data, Microstation reloads reference files (as shown in the lower left corner of the attached picture). Some of the files that are listed...
View ArticleClik here to view.
GEOPAK SS3 Problem - Profle from surface
… as reported by Terry Walters and I have now confirmed: Did you know ? If you try to create a “quick profile from surface” for an arc element from a corridor surface that crosses a template interval ,...
View ArticleOpenroads Corridor Template - Horizontal Feature Constraint Target Survey...
If I have an existing conditions survey that was assembled using terrestrial point data with point codes and feature definitions (to create point list linear features and an existing terrain model),...
View Article.asc file
I have recieved a .asc file that contatins Lidar data, how do i bring this into MX Road V8?
View ArticleAlignments in GEOPAK SS3 08.11.09.722
I have an alignment file that of course, contains all of my alignments. There is always cleanup involved with stationing, bearing text, PC/PI/PT, etc. When I move text around and clean up text overlaps...
View ArticleOpenRoads Civil Cells - Update Template
I have developed several civil cells that use linear templates in one form or another. If I make a change to the template and sync that template with the library the cell becomes unusable and I need...
View ArticleInRoads Wiki Video - Set to Private?
When I select the following url, the video comes up as being set to...
View Article