CR [IR/OR] Cross Section Viewer
When I cut sections, I like placing each sheet into its own model. This does create a number of issues however. The Cross Section Viewer does not retain the Views selected for Plan and Section when the...
View ArticleClik here to view.
Import FBK error
Does anyone have an idea what this error means? I get when importing a FBK file into OpenRoads SS4.
View ArticleClik here to view.
[PowerCivil] Operation on surfaces
Hi, is there a possibility to create new surface based on others two existing.I mean with exactly the same effect as on the picture.Picture below presents example profiles of terrain (cyan) and rock...
View ArticleOpenRoads TIW file format
Trying to import survey raw data into OpenRoads. The attached TIW files works but only imports the second setup NOT the first. What am I doing wrong?(Please visit the site to view this file)(Please...
View ArticleHow to make alg read and write in InRoads
HiHow can I make alg read and write?I have looked in "File", "Project Options", Geometry", is set to "Read-Write, but alg are nevertless only Read-only.I have PowerCivil for country SS4 /Sigfus
View Article[IR Ss2] Text Style used in XIN Placing Text using Active Color
When working on Profiles today, I was creating a few new Preferences. One area seemed to be a candidate to use one of our client supplied workspace's text styles. In the Style I selected, the Color is...
View ArticleClik here to view.
How to use ASCII file import ALG file , THANK YOU
Tools - Run Macro - AlignmentFromASCII.dllbut cannot find the dll.file
View ArticleClik here to view.
Display Super elevation in Plan - SS4
I want to label my super in the design file but the labeling tool only seems to label the primary lanes - not aux lanes. - see image below I have another file where I have 3 primary lanes but the...
View ArticleLinking Legacy XIN to DGNLIB
According to the post in http://communities.bentley.com/products/road___site_design/f/5922/p/90135/257063#257063 I should be able to link my legacy XIN file into our DGNLIB so that once it is done...
View ArticleChecking integrity of horizontal or vertical alignment in OpenRoads
In SS2 I could verify the integrity of a a horizontal or vertical alignment and then be able to move the order around and change the direction of the alignment. In SS4/Open Roads I don't know of a way...
View ArticleVertical alignment parameters
HiI have a question regarding the vertical parameters when creating a vertical alignment.If i place a circular curve of length 80m the vertical parameter comes out as something like 20 but when i view...
View ArticleCrashing in Vertical Alignment - System Fault : Bad Memory Access
As specified above, going into Vertical and out of Vertical Alignment I keep getting an error message saying *System Fault : Bad Memory Access*Does anyone have any idea why this is coming up and how to...
View ArticlePowerInroads SS3 (.722) slow performance
Hi,We are still using PowerInroads SS3 (.722) and we would rather not to take risk and upgrade to SS4 as the project is in advanced stage now.Asking just to get know if anyone here had the same...
View ArticleSuperelevation InRoads SS3 - Shoulder Rollover Lock
Ok, I have modified a previous post in hopes to clear up my question and get some answers: Here goes the issue: The superelevation that InRoads SS3 creates for you based on the .sep files never gets...
View ArticleGeopak Drainage - Building/Designing Network Issues
I am having several issues that I think are related - When I build a network, I am getting the "unable to build topology" error. If I delete one link and then re add it, the entire system will come up....
View ArticleClik here to view.
Superelevation lanes
How do i create the superelevated lanes through a two way center left turn lane that is tapering from 12' to 0' within the superelevated section? the lanes are not a constant width?
View ArticleKey-in Issue
I' having issues executing a key-in from w/ in PowerGEOPAK SELECTseries 2 or 3. The problem seems to be with having a space in the file name. Example: %acrord32 c:\my PDF.pdf. From Windows Explorer, I...
View ArticleClik here to view.
[IR SS4] Points - how to set elevation?
In InRoads SS4 is a function ,,Point"I would like to have an elevation of my point equal to the elevation of surface or alignment. Is here any function to do it?
View ArticleClik here to view.
InRoads v8i SS2: Modeling Advice - Concrete Barrier Taper Detail @ Bridge
I need to incorporate the attached detail into my InRoads v8i SS2 Roadway Modeler for a highway project I am working on. I was hoping to get some advice on the best way to approach this. Currently,...
View Articlecrash on corridor objects
I was just working with corridors and superelevation and then something happened when I tried tryed to use "Corridor Objects" and selected one of those three I have and then GKP crashed ...and I have...
View Article