SS4 - Superelevation Toggle in Template Dialogue
In SS4 there is a "new" setting for points within a template. This is the ability to define the point as a superelevation point. Toggling this check box allows a filter to be generated so that when...
View ArticleClik here to view.
Strange Component results in Cross-Sections
InRoads SS2, Microstation SS3,I have a component that is wall section. the component is set for exclude from triangulation and is a closed shape. I have a end condition on the inside of the wall that...
View ArticleExtracting utility reports
Can any one help how to create particular point reports, which includes chainage, coordinates. example: electric poles, manhole etc
View ArticleCurve fitting check box
When we trim a string in MX road using the dialog box selected from modify > edit string > Truncate string, the dialog box has a check box " Curve fitting" .What different does it make selecting...
View ArticleMX/ProjectWise - uploading models
Through inexperience I uploaded an MX project to ProjectWise some time ago using the PW integration in MX, but didn't upload any of the models from my model file. I'm now trying to rectify this error...
View ArticleKnow Issue Power[Insert Bentley Civil Product Name] When Run Using Two...
I recently read and commented on a post regarding PowerGEOPAK crashing.I have been having consistent crashes with Power InRoads and InRoads with MicroStation for a very long time. These are usually the...
View ArticleClik here to view.
Openroads ss4 Cross Section Sheet Composition Text Size Varies
Hi all,Switching from ss2 to ss4, I've noticed the Sheet Comp. is not working as before. The text size varies in size even though all text is set to the same height, style, etc... From the caption,...
View ArticleGEOPAK-SECTION - EXISTING GRADE
Hello,I am using Power Geopak v8i SS2.I am trying to place a section of existing grade into a specific cell location by selecting Road->Cross Sections->Draw Cross Sections from Surfaces->Draw...
View ArticleAnnotate a second alignment added to a profile
Hi all,Just hoping that there might be a way to do this. What I have done so far:1. Created a horizontal alignment for the centreline of rail, then Evaluation -> create a profile, to display the...
View ArticleEdit/Review Pipe and Manhole
HiWhen I try to change a style of my manhole and pipe through "Edit/Review Pipe and Manhole" in InRoads Tools nothing happen. Style Lock is offI am using Powercivil for Denmark SS4RegardsSigfús
View ArticleCivil pop-up tool behavior
Using Power Geopak SS3.I've known for a while that if AccuSnap setting Identify Elements Automatically is enabled,elements across the board flash as you mouse over (true since as far back as I can...
View ArticleTriangulation from string model
can any one help in MX ROAD V8i (Select Series 2), what is the difference between. i) Trimming method A (shrink). ii) Trimming method B(All) and iii) Trimming to a Boundary
View ArticleInRoads
HiWhen the InRoads SS4 will be released? I heard that SUDA will be included in that release.is somebody able to elaborate about clash detection for the sanitary sewers?Regards......MO
View ArticleAnnotate Drainage Profile and Manhole in Plan
HiWhen annotate pipes in profile, "PlanLength" text is placed several km from profile and all text is in one and same location.How can I label/annotate a Manhole in plan. What I want to create is label...
View ArticleSome elements won't display - Geopak V8i SS2 - Version 08.11.07.615
I have a drawing that won't display certain elements on my machine only. So far, the two elements I have found that won't display are: a line string, a curve.This is a 2D drawing. The elements will...
View ArticleInRoads SS4 - Civil Cell possible references
Hello,I'm preparing data structure for quite big project and i'm not sure how to ,,divide" local roads, so i have a question:- is it possible to place Civil Cell using as a reference line (for example...
View ArticleSimplified Geometry-SS#
In MX road suite SS3, on exporting Master strings to AutoCadd, the simplified geometry of the master string is also exported and has points at larger interval at spiral transition locations (provided...
View ArticleLegends Based on .smd Files
Does anyone know if it is possible for GEOPAK to produce a legend based on what symbols the .smd file has imported into a drawing.
View ArticlePowerGEOPAK - I was given an ALG file...
I was given an ALG file by our surveyor. Supposedly, it contains all our alignments. I need those alignments. I have PowerGEOPAK (currently SS2, downloading SS3 & SS4) How can I get those...
View ArticleComponent Quantities
Where do you edit the unit price for the component quantities report?
View Article